Easy Arrow Head Earrings

What you will need:
Gold chain (your preference)
6 gold jump rings
Pliers
2 arrow heads
Super glue (not pictured/ optional)
Gold earring hooks (your style preference)

Directions:

1. Measure around the smallest part of the arrow head with either the chain itself, or a string (that you then can place beside the chain to get the right length).
2. Open (or cut) the bracket of chain a little smaller than the length you measured.

3. Place a jump ring in the center of the chain and at the end of the chain.

4. Put created chain around the smallest part of the arrow head and connect the jumper ring with the other end of the chain.

5. Use a new piece of chain and connect it to the top of one of the jumper rings.

6. Measure over the arrow head to the other jumper ring.

7. Ply a bracket of chain (or cut and then ply) to the opposite jumper ring.

8. Attach another jumper ring to the middle of the vertical gold chain (the one you just attached).

9. Connect to your earring hook of choice
** Note: I like to place a dab of super glue under the chain to connect it to the arrow head so it is extra secure. Make sure you give it enough time to dry